Brief History of Drill Bit Development
Sep 15, 2024| Before the production technology of PDC was mature, or before the development of PDC drill bits, some manufacturers used polycrystalline artificial diamond without carbide substrate to replace natural large-grain diamond to manufacture surface-mounted drill bits. The shape of polycrystalline diamonds includes cylindrical with a cone at one end, triangular block, disc, rectangle, block, etc., such as GE's Geoset and Fomset, De Beers' Syndax3 and Zhengzhou Sanmo Institute's TSP. Their common feature is high thermal stability, that is, resistance to high temperatures of 1000℃ to 1100℃, and can be directly sintered to the crown of the drill bit body composed of tungsten carbide powder and bonding metal as drill teeth to crush and cut the formation.
From 1969 to 1975, Zhengzhou Third Grinding Institute produced several JR20SN-2 polycrystalline crystals of different diameters.
They were first used to manufacture diameter-maintaining impregnated drill bits and reamer to drill into strata below level 7 in mines. Then, 6×6mm polycrystalline crystals were used to manufacture oil scraper drill bits. Tests were conducted in Shengli Oilfield. Taking drilling into the same well depth of 2400m as an example, compared with carbide scraper drill bits, polycrystalline scraper drill bits can save 11,000 to 12,000 yuan per well and save 78% of time; compared with roller drill bits, polycrystalline scraper drill bits can save more than 50% of costs and reduce drilling time by 5 to 8 days. In addition, geological coring drill bits and reamer made of 1.8×5mm polycrystalline crystals and 2.5×5mm polycrystalline crystals are used to maintain the diameter of metallurgical, coalfield and geological impregnated drill bits, and their effects are also similar to natural diamonds.
Before the success of my country's self-developed PDC in the early 1980s, 6×6mm polycrystalline was widely used in coring drill bits and watermelon-peel-shaped full-drilling drill bits for oil and gas drilling. Triangular block polycrystalline was also widely used in the manufacture of coring or full-drilling drill bits for medium-hard to hard formations (such as limestone and dolomite) and slightly abrasive formations. Since the large-scale production of domestic PDC in the 1990s, polycrystalline artificial diamond has gradually withdrawn from the drilling market and has been completely replaced by PDC.
The development and application of PDC drill bits for oil and gas drilling has gone through a considerable period of time. The impact resistance of early PDC was not high and there was stratification. In addition, there were problems in the design and manufacturing of drill bits and the risk of oil and gas drilling. The performance of roller drill bit manufacturers, which occupied a large share of the drilling market, was not so active. Therefore, the development and application of PDC drill bits encountered great difficulties and resistance.
Between 1973 and 1975, the United States used GE's 8.38×2.8mm, 0.5mm thick diamond layer PDC (Compax) welded to carbide tooth columns and then installed on steel drill bits for testing. A large amount of original test data showed that PDC can replace natural diamonds on surface-mounted drill bits used to drill the hardest and most abrasive rocks. However, considering the structural and performance characteristics of PDC and the fact that most oil and gas formations are soft to medium-hard formations, drill bit manufacturers have focused on the application of PDC in the oil drilling market, which has significant market prospects. The Drilling Research Center of the University of Tulsa in the United States participated in the initial design of the flat PDC drill bit and conducted key tests on the PDC itself. During this period, GE conducted tests on four PDC drill bits in South Texas, Colorado, Utah, and Upper Michigan, exposing some problems in PDC column teeth, drill bit design and manufacturing.
After the problems in the initial tests were solved, GE launched the Stratapax series of PDC products for drill bits in December 1976. Its performance was improved, it was more impact-resistant, and it was easier to fix to the drill bit body. At the same time, Diamant B0art conducted some relatively successful PDC drill bit tests in the Persian Gulf and North Sea salt rocks, and Eastman Christensen conducted some relatively successful PDC drill bit tests in the North Sea.
After the above preliminary exploratory tests, from the late 1980s to the present, PDC manufacturers have made a series of improvements and innovations to PDC, which has greatly improved the various performances of PDC. As the energy market is booming and crude oil prices continue to hit new highs, major drill bit companies have actively developed a series of new PDC drill bits with oil companies to improve the use effect and expand the application field.

