Classification and selection
Sep 10, 2024| There are many types of drill bits currently used in the petroleum industry. Drill bits are classified based on different drilling methods. They can be divided into diamond drill bits, cone drill bits and scraper drill bits. These three drill bits are the most basic drill bit forms. Among these three types of drill bits, the most commonly used and widely used one in oil drilling is the roller cone drill bit, which is also widely used. Comparing these three drill bits, the one that is least used is the scraper drill bit. This article mainly introduces diamond drill bits and roller cone drill bits.
Diamond
A drilling tool whose cutting edge uses diamond material is a diamond drill bit. The main advantage of a diamond drill bit is that it can adapt to formations with higher abrasiveness and harder geology, and its cutting performance is also relatively good. It has very significant advantages in high-speed drilling.
Based on the differences in the strata to which they are adapted, diamond drill bits can be divided into two categories: ordinary diamond drill bits and polycrystalline diamond composite sheet drill bits. Among these two categories, ordinary diamond drill bits are suitable for formations with higher abrasiveness, harder geology, and complex geology; polycrystalline diamond composite drill bits can be widely used in hard formations, soft formations, and moderately soft and hard formations. The formation has a wide range of applications. The difference in blades is the main difference between these two diamond drills.
Polycrystalline diamond composite disc drill bits mainly have four components, namely diamond composite discs, nozzles, matrix and drill bit bodies; ordinary diamond drill bits mainly have four components, namely diamond particles, nozzles, matrix and drill bit bodies. Because the cutting performance of diamond drill bits is relatively good, when choosing diamond drill bits as oil drilling tools, they can drill at high speed and expand the drilling depth to a certain extent. In the process of using diamond drill bits for oil drilling operations, the following aspects require great attention:
First, the price of diamond drill bits is relatively high, so you should be careful when using them to reduce the degree of damage;
Second, diamond drill bits have certain defects in thermal stability, so the cooling performance and cleaning of the drill bit must be ensured when using it;
Third, its texture is relatively brittle, so the impact resistance of diamond drill bits will be relatively poor, and strict and standardized operations should be carried out in strict accordance with the relevant regulations of diamond drill bits.
Gear wheel
Based on the structure of the roller cone bit, it can be divided into five parts: water eye, bearing, palm, cone and bit body. If it is a sealed jet type roller drill bit, it usually also includes the oil storage compensation system. The thread is generally on the upper part of the roller cone bit, and the drill string and the thread are connected to each other. There is a cone on the lower part of the drill bit, with three palms on it. The cone is mounted on the cone shaft, and there are bearings between the cone shaft and each cone. , the cone will break the rock through its own cutting teeth. The channel of drilling fluid is the water hole of the drill bit. In the process of oil drilling, through the transverse shear effect and longitudinal vibration effect during the drilling process, the roller cone bit will achieve the purpose of breaking the rock, thereby increasing the drilling speed.
When selecting a roller cone drill bit as an oil drilling tool, the selection of the roller cone drill bit needs to be based on the actual conditions of the drilling equipment, the actual conditions of the formation, and the geological data and formation data of the adjacent oil wells. When making a choice, the main issues that need to be considered are the following:
First, it should be considered whether there is an interlacing of soft and hard conditions in the drilling formation;
Secondly, it should be considered whether anti-deviation drilling and curve operations are needed in oil drilling work;
Thirdly, the actual depth of different drilling sections in the same oil well should be considered;
Finally, the drilling geology, grindability and hardness of the formation should be considered.

