Prop Production Process

Oct 30, 2024|

Coating technology

Coating the tool is a major change in the mechanical processing industry. It is to coat one, two or even multiple layers of thin layers of high hardness, high wear resistance and high temperature resistant materials (such as TiN, TiC, etc.) on the substrate with high toughness of the tool, so that the tool has comprehensive and good comprehensive performance. The hardness of uncoated high-speed steel is only 62~68HRC (760~960HV), and the hardness of cemented carbide is only 89~93.5HRA (1300~1850HV); while the surface hardness after coating can reach more than 2000~3000HV. In industrial production, the use of coated tools can improve processing efficiency, processing accuracy, extend life and reduce costs. In the past 30 years, tool coating technology has developed rapidly, and coated tools have been widely used. Coated high-speed steel tools and coated carbide tools have accounted for more than 50% of the total use of all tools. In Western Europe, due to the scarcity of resources and the high efficiency of mechanical processing, as well as the advancement of CNC technology and the increase in difficult-to-process materials, coated tools are passively advancing at an astonishing speed. The proportion of coated tools used in Western industrialized countries has increased from 26% in 1978 to 90% in 2005. About 80% of the tools used in new CNC machine tools are coated tools.

 

Advantages of coated tools

Because the surface coating material has high hardness and wear resistance, and is resistant to high temperatures. Therefore, compared with uncoated tools, coated tools allow higher cutting speeds, thereby improving cutting efficiency; or can increase tool life at the same cutting speed. Since the friction coefficient between the coating material and the processed material is small, the cutting force of the coated tool is less than that of the uncoated tool. The quality of the machined surface of the part is better when processed with coated tools. Due to the good comprehensive performance of the coated tool, the coated carbide insert has good versatility, and a coated carbide grade of insert has a wider range of use. China's tool coating technology is still far behind that of industrially developed countries, and the number of coated tools is also far behind, accounting for only 20% of all tools. Among them, most are used on CNC machine tools and machining centers, and very few are used on ordinary non-CNC machine tools, mainly due to cognitive issues and price factors. Therefore, in China, the development and application of tool coating technology have a lot of potential for improvement.

 

Cutting tools

According to the needs of the development of the manufacturing industry, multifunctional composite tools and high-speed and high-efficiency tools will become the mainstream of tool development. Faced with an increasing number of difficult-to-process materials, the tool industry must improve tool materials, develop new tool materials and more reasonable tool structures. The application of cemented carbide materials and coatings has increased. Fine-grained and ultra-fine-grained cemented carbide materials are the development direction; nano-coatings, gradient structure coatings and coatings of new structures and materials will greatly improve the performance of tool use; the application of physical coatings (PVD) continues to increase. The application of new tool materials has increased. The toughness of tool materials such as ceramics, metal ceramics, silicon nitride ceramics, PCBN, PCD, etc. has been further enhanced, and the application occasions are increasing. Cutting technology is developing rapidly. High-speed cutting, hard cutting, and dry cutting continue to develop rapidly, and the scope of application is rapidly expanding.

 

Send Inquiry