Tool Processing Principle

Nov 05, 2024|

The rolling tool can use the plastic deformation of metal at room temperature to flatten the microscopic unevenness of the workpiece surface, thereby changing the surface structure, mechanical properties, shape and size. Therefore, this method can achieve both finishing and strengthening purposes at the same time, which cannot be achieved by grinding and turning. No matter what kind of metal processing tool is used for processing, there will always be fine uneven tool marks on the surface of the part, and there will be staggered peaks and valleys. A certain pressure will cause the surface metal of the workpiece to flow plastically and fill in the original residual low concave troughs, thereby reducing the surface roughness of the workpiece. Due to the plastic deformation of the rolled surface metal, the surface structure is cold hardened and the grains are refined, forming a dense fiber shape, and a residual stress layer is formed, the hardness and strength are improved, thereby improving the wear resistance, corrosion resistance and compatibility of the workpiece surface. Rolling is a non-cutting plastic processing method.

 

Inner cone rolling cutter

Rolling cutters have no blades. The processing technology is safe and convenient. They can be basically applied to all metal processing industries and can accurately control the precision. There are several major advantages:

External cone rolling cutter

1. Improve surface roughness. The roughness can basically reach Ra≤0.08µm.

2. Correct roundness. The ovality can be ≤0.01mm.

3. Improve surface hardness, eliminate stress deformation, and increase hardness HV≥4°

4. There is a residual stress layer after processing, which increases fatigue strength by 30%.

5. Improve the matching quality, reduce wear, and extend the service life of parts, but the processing cost of parts is reduced. Application advantages High efficiency - the surface can be processed to the required surface accuracy in a few seconds, and the efficiency is 5-20 times that of grinding and 10-50 times that of turning.

 

Through-hole rolling cutter

High quality - Achieve mirror surface accuracy of Ra0.05-0.1um in one feeding; and make the surface extrusion hardened, improve wear resistance and fatigue strength; eliminate surface stress plastic deformation, and the dimensional accuracy can remain relatively stable for a long time.

 

Blind hole rolling cutter

Economic - No need to invest in large-scale equipment, land occupation, power consumption, waste slag treatment, etc.; No need to invest in professional technicians. Convenient - Can be clamped on any rotating and feeding equipment, and can be processed with mirror surface accuracy without professional training. Environmental protection - no chips (protect the environment), low energy consumption. Safety - No cutting rolling tools have no blades. Rolling heads are divided into rolling heads for ordinary lathes and deep hole rolling heads for deep hole drilling and boring machines. The above is a rolling head for ordinary lathes, and this is a rolling head for deep hole drilling and boring machines.

 

← Previous: Knife Selection
Send Inquiry